Motorola A835 Bluejacking Guide

1. Go to Contacts (Default control is down joystick).
2. Press joystick up once to get to '[Add Entry]'
3. Press 'Select'
4. Highlight 'Phone Number'
5. Press 'Select'
6. Press 'Select' once more and type in a message as the name
7. Press 'OK'
8. Press 'Select' and enter a number (can be anything i.e. 12345)
9. Press 'OK'
10. Press 'Done'
11. Press 'Menu' (Middle key) and move joystick up 1 to highlight 'Send'
12. Press 'Select'
13. Highlight 'Bluetooth' and Press 'Select
14. With [Look For Devices] highlighted, press 'Select'
15. If scan is successful (*see note 1), a list of devices will appear. Select a device from the list with joystick, then press 'Select' to send the contact.

*note 1: The scan has two passes. During the first pass, the phone looks for devices in range. If one is found, it is counted and the scan continues. At the end of the first pass, the phone has the MAC (Media Access Control) addresses of each device in range when the first pass took place. If the scan is interrupted by pressing 'Stop', these addresses will be visible.

In the second pass, the phone attempts to retrieve the Bluetooth Name set in each of the devices. If a device has moved out of range or has a marginal signal, the MAC Address is displayed. Please note that some devices' Bluetooth Names are set to the MAC address by default.

Written by stevesm

:: bluejacking guides ::

Motorola A835
Motorola E550
Motorola V500/V600/V551/V547/V555
Nokia 6310 & 6310i
Nokia 6600
Orange SPV C500/iMate
Sony Ericsson T610/T630
Sony Ericsson Z600
Palm Tungsten T / T2
Sony Ericsson P800 / P900
XDAII & iMate
Any Bluetooth PC